LMI TruPosition 107/108 Probe Analog Signal Output

TruPosition Probe Analog Signal Output

TP107 & TP108 Probes   Short overall length is well suited for measuring underneath parts without raising the part from the fixture.   A and B axis readings are taken with a single push of the switch box button. Connect an LMI 200 Series Probe to the switch box and send surface variable data to the same data collector.        See Design and Building Information (PDF).

Models	Range	Shaft Dia	Shaft Length	Accuracy	Repeatability	Max Hole Dia
TP107	.236"/6.00mm	1.25	3.20" & 5.20"	+/-.001"/.02mm	+/-.0005"/.01mm	.930"/23.62mm
TP108	.125"/3.17mm	1.00	3.20" & 5.20"	+/-.001"/.02mm	+/- .0005"/.01mm	.930"/23.62mm

Download CAD Data

TruPosition Probe Features

TP107 - TruPosition Probe (shown)         TP108 - TruPosition Probe (shown)

TruPosition TP107 Probe   Specify the model and make of the data collector to be used in order to determine which switch box and cable is required.   An LMI OSM 1.25 Offset Master is required for calibration (sold separately).     Items included with the TruPosition 107 Probe: Zero Master Calibration Certificate    TruPosition 107 Probe Data Sheet (PDF)           TruPosition TP108 Probe   Specify the model and make of the data collector to be used in order to determine which switch box and cable is required.   An LMI OSM 1.00 Offset Master is required for calibration (sold separately).     Items included with the TruPosition 108 Probe: Zero Master Calibration Certificate      TruPosition 108 Probe Data Sheet (PDF)