lg_white_fade

LMI 200 Series Probes

200 Series Probes will change the way you collect your SPC data

Give it the "4 Foot" drop test! "The PROBE" stands alone as a  durable precision linear measurement instrument that continues to perform while other linear measurement devices have been repaired or replaced multiple times. " The PROBE" is designed to provide repeatable accuracy. Also its rugged construction will withstand high shock, side load, and years of use in the shop environment. In fact, the LMI 200 probe transducers have become a standard component of the  checking fixtures in much of the automotive industry.

LMI 200 Probe Series Features

 Allows SPC data to be collected quickly and accurately. 

 Compatible with most data collectors.

 Durable construction (aircraft aluminum; hardened tool steel; tough, corrosion-resistant plating).

 Solid state electronics resist shock and dust. 

 Accuracy: +/- 0.03mm / 30μm (contact LMI for inquiries about 22mm span).


Click here to download the 200 Series brochure.

200 Series Probes

LMI 200-SB-50 Series Probes_190x126trans

Independent linearity: 0.5% (0.15-0.25%).

Spans: 10mm and 22mm measurement travel available.

Fits standard 3/8in. diameter bushing.

Spring Force: 3.3 oz @    nominal position for the 200-S, SB and SC (custom available) 3.9 oz @nominal position for the LMI200-SF.

200 Series Master Blocks

LMI 200 Probe Master Blocks-400

LMI 210: Nominal:31mm. Fits Probes 200-S and 200-SB.

 LMI 212: Nominal: 68mm. Fits Probe 200-SC.

 LMI 214: Nominal :54mm. Fits Probe 200-SF.

Custom nomicals available as well.

200 Series Transfer Gauges

LMI 200 Series Probe Options 268 & 269 - with 200-S_190x126

The transfer gages are spring loaded and can be locked into the retracted position for part loading and unloading.

 Both units have 10mm of travel and are used with the LMI 200-S or LMI 200-SB.

 LMI 267 Right Angle Transfer can be used with any 31mm probe.

200 Series Probe Adaptors

LMI 200 Series Probes with 234, 235, 236_190x126trans

LMI 234:  Attaches to the probe to obtain readings from the door seal (LMI 235) to the deck lid (LMI 236) gap check gage.

  LMI 235: This instruments checks the gap between the door flange and the door itself.

LMI 236: This instrument checks the gap between the deck lid flange and the deck lid.